Best Way To Hang A Heavy Mirror
Hang a mirror using cleats.
Best way to hang a heavy mirror. Mark the location of the top edge and the center of the frame. Usually you position the top cleat at the top of the frame make shallow holes and attach it with the included screws. Another convenient way to hang a mirror is by using scotch clear mounting tape. You can also use metal cleats to hang mirrors with sturdy frames.
The double sided tape can support up to 10 pounds and is ideal for mounting glass tile and artwork. Aside from eliminating the need for tools during installation the seamless material does not require punching a hole in your drywall. Mark both edges of each stud and then place a piece of tape to mark the center of the stud between the marks. Mark 2 spots about 6 inches 15 24 cm from the top on either side of the.
Locate all the studs in the area where you ll hang the mirror. Using a hanging wire 1. A variety of drywall anchors are available. Your mirror is too heavy for picture hooks alone but a wall anchor would likely do the trick to attach them to a wall made of drywall or plaster.
Just follow the package directions. Use a tape measure to find the center of your mirror. Place a scrap piece of wood that is approximately half as long as the mirror is wide underneath the hanging wire on back. Install screw eyes near the.
Measure the length and width of your mirror the middle points. Hold the mirror against the wall at the desired position. Pull the wood piece toward the.